+86 151 7627 9038Application of creep pump in environmental protection industry
Product Details
Environmental Protection Industry: Introduction to Automatic Smoke Monitoring System:
A smoke automatic monitoring system(CEMS) refers to a device that continuously monitors the concentration and total emission of gaseous pollutants and particulate matter emitted by atmospheric pollution sources and transmits information to the competent authority in real time. CEMS consists of gaseous pollutant(SO2, NOX) monitoring subsystem, particulate matter(dust) monitoring subsystem, flue gas parameter measurement subsystem, data collection and processing subsystem, and data communication system. The concentration of pollutants in the flue gas is determined by on-site sampling method, and parameters such as flue gas temperature, pressure, flow rate, humidity, oxygen content are measured, and the flue gas pollutant discharge rate and emissions are calculated.
Customer requirements:
The flue gas automatic monitoring system needs to condense the flue gas to separate the gas and water before the flue gas enters the gas analyzer, and discharge the condensed water from the system. This prevents corrosion of the gas analyzer and multiple components due to the high humidity of the flue gas. Gas monitoring needs to strictly ensure the sealability of the monitoring system. Therefore, the sealability of the condensation water discharge system is required to prevent outside air from entering the condenser through the drainage system and affect the sample gas composition. The chemical composition of condensed water is complex and corrosive, and when the filter effect of the pre-sample gas is not good, the condensed water will also contain solid particles. Therefore, the condensation water discharge system is required to have good corrosion protection performance and is suitable for grinding fluids.
Sino solution:
Sino creep pump products have good sealing performance, wide flow range, strong self-absorption ability and stability, when transmitting fluids, fluids only contact with hoses, through the selection of corrosion-resistant hoses can be used to transmit a variety of corrosive fluids, The wear-resistant hose can be used to transfer abrasive fluids by selecting. Creep pump products have a variety of control methods, easy to integrate with the system control, real time to complete the cooling water drainage function.
Customer Value:
1. Good air tightness to prevent outside air from entering the condenser through the drainage system
The creep pump itself has a good airtightness, no need to use the valve, no liquid reflux and siphon, even if the pump is not running, the hose will be sealed well due to extrusion.
2. Effective and timely discharge of condensation water
The creep pump has a strong self-suction capacity, up to 0.95 Bar, suitable for vacuum environment minimum pressure of -0.95 Bar(g)
Creep pump has a variety of drainage methods, fixed speed creep pump drainage flow stability, and speed creep pump can change the drainage speed according to the actual water to achieve timely drainage function
Creep pump has a variety of control methods, through RS485 communication control, analog signal control and other methods to control the operation of the pump, easy to integrate with the system control, and complete the cooling water drainage function in real time.
3. Suitable for discharging condensed water containing solid particles
When the creep pump transmits the fluid, the fluid only comes into contact with the inner cavity of the hose. Select a wear-resistant hose to be used for the transmission of abrasive condensation water for a long time.
Soft particle size > 25 % * ID(tube diameter)
Hard particle size <UNK> 5 % * ID(tube diameter)
4. Suitable for discharging corrosive condensed water
When the creep pump transmits the fluid, the fluid only comes into contact with the inner cavity of the hose. Select a hose suitable for corrosion-resistant materials and can be used for the transmission of corrosive condensed water for a long time.
5. Fluid transmission reliability, simple maintenance
Creep pumps transport fluid without valves and seals and without pump damage due to dry operation
Simple and convenient replacement of creep pump hose and low maintenance cost
A smoke automatic monitoring system(CEMS) refers to a device that continuously monitors the concentration and total emission of gaseous pollutants and particulate matter emitted by atmospheric pollution sources and transmits information to the competent authority in real time. CEMS consists of gaseous pollutant(SO2, NOX) monitoring subsystem, particulate matter(dust) monitoring subsystem, flue gas parameter measurement subsystem, data collection and processing subsystem, and data communication system. The concentration of pollutants in the flue gas is determined by on-site sampling method, and parameters such as flue gas temperature, pressure, flow rate, humidity, oxygen content are measured, and the flue gas pollutant discharge rate and emissions are calculated.
Customer requirements:
The flue gas automatic monitoring system needs to condense the flue gas to separate the gas and water before the flue gas enters the gas analyzer, and discharge the condensed water from the system. This prevents corrosion of the gas analyzer and multiple components due to the high humidity of the flue gas. Gas monitoring needs to strictly ensure the sealability of the monitoring system. Therefore, the sealability of the condensation water discharge system is required to prevent outside air from entering the condenser through the drainage system and affect the sample gas composition. The chemical composition of condensed water is complex and corrosive, and when the filter effect of the pre-sample gas is not good, the condensed water will also contain solid particles. Therefore, the condensation water discharge system is required to have good corrosion protection performance and is suitable for grinding fluids.
Sino solution:
Sino creep pump products have good sealing performance, wide flow range, strong self-absorption ability and stability, when transmitting fluids, fluids only contact with hoses, through the selection of corrosion-resistant hoses can be used to transmit a variety of corrosive fluids, The wear-resistant hose can be used to transfer abrasive fluids by selecting. Creep pump products have a variety of control methods, easy to integrate with the system control, real time to complete the cooling water drainage function.
Customer Value:
1. Good air tightness to prevent outside air from entering the condenser through the drainage system
The creep pump itself has a good airtightness, no need to use the valve, no liquid reflux and siphon, even if the pump is not running, the hose will be sealed well due to extrusion.
2. Effective and timely discharge of condensation water
The creep pump has a strong self-suction capacity, up to 0.95 Bar, suitable for vacuum environment minimum pressure of -0.95 Bar(g)
Creep pump has a variety of drainage methods, fixed speed creep pump drainage flow stability, and speed creep pump can change the drainage speed according to the actual water to achieve timely drainage function
Creep pump has a variety of control methods, through RS485 communication control, analog signal control and other methods to control the operation of the pump, easy to integrate with the system control, and complete the cooling water drainage function in real time.
3. Suitable for discharging condensed water containing solid particles
When the creep pump transmits the fluid, the fluid only comes into contact with the inner cavity of the hose. Select a wear-resistant hose to be used for the transmission of abrasive condensation water for a long time.
Soft particle size > 25 % * ID(tube diameter)
Hard particle size <UNK> 5 % * ID(tube diameter)
4. Suitable for discharging corrosive condensed water
When the creep pump transmits the fluid, the fluid only comes into contact with the inner cavity of the hose. Select a hose suitable for corrosion-resistant materials and can be used for the transmission of corrosive condensed water for a long time.
5. Fluid transmission reliability, simple maintenance
Creep pumps transport fluid without valves and seals and without pump damage due to dry operation
Simple and convenient replacement of creep pump hose and low maintenance cost
